Data Recovery Portsmouth

RAID Data Recovery

Our experts have extensive experience recovering data from RAID servers. With 15 years experience in the data recovery industry, we can help you securely recover your data.

Software Fault £249

2-3 Days

Mechanical Fault £349

2-3 Days

Critical Service £795

2-3 Days

 

 

 

Raid Server Failure including Dell, HP, Compaq, IBM etc:

Raid Server fail on a daily basis. We are the leading UK Raid recovery experts and have 15 years experience recovering Raid systems such as Dell PowerEdge servers, HP Proliant servers etc. We offer very quick turnaround times and we can recover data from all raid configurations including Raid 0, Raid, Raid 5, Raid 10 etc. We can recover data from raid controller failures, rebuild failures, reinstalled failures, VMWare – Virtual Disk failures, deleted, formatted or reinstalled failures etc. If your raid server has failed and cannot boot up and you cannot access the data phone us for a quote and some expert advice. Below is a list of some of the Raid failures we receive in for recovery:

Raid Server Mechanical or Physical Failure:

Raid server components will fail normally due to the heavy workload of the system being on 365 days x 24 hours. Raid controllers can fail without warning, replacing the raid controller with an identical controller does not always enable you to boot raid system. Hard disks can also fail on raid servers, whether it is SCSI, SAS or SATA disks we are experts at diagnosing and extracting data from mechanically damaged disks such as read/write heads, motor damage, disk platter damage, water or fire damage etc.

Raid Server Rebuild Failure:

Raid Servers fail, if you are running a Raid 5 system and one disk fails you will normally have the option to rebuild the Raid data parity onto a new disk. Sometimes the rebuild process will fail after a few percent or will complete but then raid server will not boot. We are experts in recovering data from failed raid rebuilds and have a very high success rate of recovering data from this type of problem.

Raid Server PCB or Firmware Failure:

Raid servers can contain data that has become corrupt or missing. This means the file system has become corrupt normally due to read/write issues with the server hard disks. When this happens it means there is either read/write head issues or bad sectors on the server hard disks. A faulty raid controller card is a common issue. These will fail, simply replacing the raid card with a like for like card will probably not allow you access to your raid data. If you have a raid server problem contact us today as we are the leading raid recovery specialists within the UK.